DCE 48V POEI-12PH IEEE 802.3af 12-Port Power over Ethernet PoE Web Management Injector Hub

Quick and Easy PoE Network Deployment
The Data Connect DCE 48V POEI-12PH is 12-Port IEEE 802.3af Power over Ethernet Web Management injector Hub and complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3af standards. With 12 10/100Base-TX Fast Ethernet ports, DCE 48V POEI-12PH support full 48V DC power for any remote IEEE 802.3af powered device (PD) like Wireless LAN Access Point, IP phone, and IP Camera. Supporting PoE power budget of 190 watts, DCE 48V POEI-12PH provides sufficient 15.4 watts PoE power to 12 remote PD devices.

Easy Cabling installation
The DCE 48V POEI-12PH is installed between a regular Ethernet Switch and the powered devices, injecting power without affecting the data transmission. They offer a cost effective and quick solution to upgrade network system to IEEE 802.3af Power over Ethernet system without replacing the existing Ethernet switch. There are 24 RJ-45 STP ports on the front panel of PoE Injector Hub, in which the 12 ports on the lower stack function as "Data input" and the other 12 ports on the upper stack function as "PoE (Data and Power) output". Each of the "PoE output" port on the upper stack operates as a power injector which transmits DC Voltage to the CAT 5 cable to transfer data and power simultaneously between the Injector and Splitter.

Friendly / Simple Web Management Interface
To efficiently manage the powered devices, DCE 48V POEI-12PH provide Web management interface in which administrators can use the functions including port Enable / Disable, port priority, system configuration, and Username / Password changing and with smart features for powered device. The PoE injector Hub can auto detect the power status of each port and show massages on its Web management interface. These features also provide a cost-effective way to manage the device via from Internet whenever you are at work or at home.

Application

PoE Injector Hub
For the places hard to find the power outlet, DCE 48V POEI-12PH provides the easiest way to power your Ethernet devices on the ceiling and the Wireless Access Point installed on the top of the building.

To control the power system of your networking devices, DCE 48V POEI-12PH can directly co-work with PoE IP phone to build VoIP telephony network in the office. Furthermore, the DCE 48V POEI-12PH can be directly connected to any third party 802.3af compliant devices and PoE Switches installed 100 meters away.

Key Features

Interface
• 24-Port RJ-45 STP
Ø–12-Port “Data input”
Ø–12-Port “PoE (Data + Power) output”
• 1 10/100Base-TX Management port with Auto MDI / MDI-X feature

PoE
• Complies with IEEE 802.3af Power over Ethernet Mid-Span PSE
• Up to 12 IEEE 802.3af devices powered
• Support PoE Power up to 15.4 watts for each PoE ports
• Auto detect powered device (PD)
• Circuit protection prevent power interference between ports
• Remote power feeding up to 100m

PoE Management
• Total PoE power budget control
• Pert port PoE function enable/disable

• PoE Port Power feeding priority
• Per PoE port power limit

PoE Management (cont.)
• PD classification detection

Management
• Web interface for remote management
• Firmware upgrade through Web interface
• SNMP Trap for alarm notification of events

Hardware
• 19-inch rack mountable; 1U height
• Reset button for reset to default setting and system reboot
• LED indicators for PoE ready and PoE activity

Standard Compliance
• IEEE 802.3 10Base-T
• IEEE 802.3u 100Base-TX
• IEEE 802.3af Power over Ethernet
• FCC Part 15 Class A, CE

Specifications

Model	DCE 48V POEI-12PH
Hardware Specification
Interface	"Data" Input Ports: 12 x RJ-45 STP "PoE (Data+Power)" Output Ports: 12 x RJ-45 STP Management Port: 1 x RJ-45; 10/100Base-TX, auto-negotiation, auto-MDI / MDIX
LED	System: Power x 1 (Green) Management Port x2: 10/100 (Green / Orange) Per PoE Port: PoE in Use x 1 (Green)
Network Cable	10Base-T: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328ft) 100Base-TX: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328ft) EIA/TIA- 568 100-ohm STP (100m)
Dimension (W x D x H)	440 x 200 x 44 mm (1U height)
Weight	2.7kg
Power Requirement	100-240V AC, 50/60 Hz
Power Consumption	200 watts max.
Operating Temperature	0 ~ 50 Degree C
Storage Temperature	-40 ~ 70 Degree C
Humidity	5 ~ 95% (Non-condensing)
Cooling	Fan x 1
Power over Ethernet
PoE Standard	IEEE 802.3af Power over Ethernet / Mid-Span PSE
PoE Power supply Type	Mid-Span
PoE Power Output	Per Port DC 48V 15.4 watts
Power Pin Assignment	4/5(+), 7/8(-)
PoE Power Budget	190 Watts
Management
Management Interface	Web, Smart Discovery Lite
PoE Management	Power Limit by Priority and Total Limit Per port power enable/disable Power feeding priority Current usage and status Total power consumption
Management Feature	System / Management functions setup Web firmware upgrade SNMP Trap for alarm notification of events
Standards Conformance
Standards Compliance	IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3af Power over Ethernet
Regulation Compliance	FCC Part 15 Class A, CE

Customers who bought this product also purchased

Draytek Vigor 2820n ADSL2/2+ Security Firewall Wireless 802.11n