|
OptiQroute 2140 4-Port WAN Ethernet Load Balancing Router
The OptiQroute 2140 load balancing router can be connected behind up to 4
Internet data routers of any kind: DSL, Cable, T1, SHDSL, Wireless router, or
any combination of the same. The 2140 was
designed for businesses seeking to balance and aggregate bandwidth on
more than two Internet data lines while securing line failover.
The OptiQroute 2140 can also balance incoming traffic using its
HyperDNS server. This is ideal for applications when traffic from the Internet
into your company needs to be delivered and balanced over the incoming lines.
The OptiQroute 2140 also supports LAN server load balancing.
Virtual Router Redundancy Protocol (VRRP) is available in the 2140: two
units can be installed one as master and the second on stand-by to
provide unit failover.
OptiQroute 2140 Load Balance Router High Availability Failover Application
Quick Specs
-
Higher Bandwidth -
Inbound/Outbound Load Balancing
- Up to Four 100 Mbps lines aggregated from your
ISP, ADSL, Cable, or combinations of the same
- Load Balance Throughput of up to 75 Mbps
-
Robust
Memory
- 16 MB Flash / 128 MB SDRAM
-
Private Communications:
- Up to 150 LAN-to-LAN and up to 500 road warrior
IPSec VPN tunnels
-
Virtual Server Load
Balancing
-
NAT Mode
-
Transparent Mode
-
Comprehensive Network
Security Suite
- VPN / SPI Firewall
- NAT / PAT
- DMZ Host to separate your local LAN from outside world
- IP Aliasing
- Anti-DoS
- Cost-effective
SNMP-manageable and web-based network management
-
Seamless
interoperability to upgrade last-decade networking equipment
-
Supports multiple
network protocols
-
Easy setup
-
Firmware upgradeable
OptiQroute 2140 model is both desktop and rack mountable.
|
