|
The VX-VEB160R2 Ethernet
extender supports the signal conversion between traditional Ethernet and
innovative VDSL2 technology. The device is the right solution to integrate
current Ethernet applications with the new building's phone line network
technology.
The VX-VEB160R2 Ethernet
extender supports symmetrical and asymmetrical data transmission bandwidth up to
50Mbps and distances of up to 1000ft. It is ideal for providing video-on-demand
and multimedia services to apartments, hotels, and campuses without rewiring
considerations. Moreover, the distance expansion also provides wide range
coverage.
The VX-VEB160R2 Ethernet
extender is plug-n-play without any software to configure and is also fully
compliant with various network protocols. Moreover, the rich diagnostic LEDs on
the front-panel provide the operating status of the system.
|
Application |
|
Ethernet Distance extension
Two VX-VEB160R2 acting as a standalone pair is good for Ethernet
distance extension over existing telephone wires. With just one pair
of AWG-24 copper wire, you can easily connect two Ethernet networks
together with maximum 100/55Mbps data rate. Telephone service can
still be used while the modems are in operation.
MTU / MDU / Hospitality Solution
The VX-VEB160R2 is the best solution to quickly provide
cost-effective, high speed network services to multi-unit buildings,
such as residential (multi-dwelling units) and commercial
(multi-tenant units) buildings, hotels and hospitals. By utilizing
the existing telephony infrastructure, network installation is
straightforward and requires no new wiring. With up to 100/55Mbps,
Video on Demand, IP telephony and various broadband services can be
easily provisioned.
Last Mile of FTTx deployment
The VX-VEB160R2 is a great and ideal solution for FTTx (Fiber to the
Building, Fiber to the Campus or Fiber to the Node) applications, it
supports high bandwidth VDSL2 over existing telephone wires in the
“last mile” from the ISP / Telecom / Service provider’s fiber node
to the buildings and customers´ home. The 10/100Mbps port of
VX-VEB160-R1 can be directly connected to a PC or to Ethernet
devices such as Ethernet Switches and Broadband Routers. It is
excellent for phone line network built by Internet because every
room or house could use the existing phone line to transmit data in
the Internet and the whole building could share the Internet to the
wider area network with minimum cost.
|
Key Features
• Cost-effective VDSL2 CO / CPE
Ethernet extending solution
• One box design, CO / CPE selectable via DIP Switch
• Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x standards
• DMT (Discrete Multi-Tone) line coding
• Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
• Built-in POTS / ISDN splitter
• Two RJ-11 connectors for each VDSL port, one for VDSL connection and one for
POTS connection
• Voice and data communication can be shared based on the existing telephone
wire
simultaneously
• Supports up to 1536 bytes packet size, IEEE 802.1Q VLAN tag transparent
• VDSL2 stand-alone transceiver for simple bridge modem application
• Advantage of minimum installation time (Simply as Plug-and-Play)
• Selectable target data rate and target SNR margin
• Supports extensive LED indicators for network diagnostics
• Compact in size, easy installation
VX-VEB160R2 Ethernet Extender Product Features:
| Ports: |
 |
10/100Base-TX: 1 RJ-45,
Auto-negotiation and Auto-MDI / MDI-X |
|
|
VDSL: 1 RJ-11, female Phone Jack
|
|
|
PHONE: 1 RJ-11, Built-in splitters
for POTS / ISDN connection |
|
Functionality: |
|
|
CO / CPE mode select |
|
|
Selectable fast and interleaved mode |
|
|
Selectable target data rate |
|
|
Selectable target SNR mode |
Encoding: |
|
VDSL-DMT
- ITU-T G.993.1 VDSL
- ITU-T G.997.1 |
|
|
ITU-T G.993.2 VDSL2 (Profile 12a
Support), Annex A |
LED Indicators: |
|
|
One Power |
|
3 for RJ-11 / VDSL2 WAN :
- Green, LINK / ACT
- Green, CO mode
- Green, CPE mode
|
|
2 for per RJ-45 10/100Base-TX port
- Green, LINK / ACT
- Green, Speed |
Cabling Type: |
|
|
10Base-T: 2-pair UTP Cat.3,4,5 up to
100m (328ft) |
|
|
100Base-TX: 2-pair UTP Cat.5, up to
100m (328ft) |
|
|
VDSL2: twisted-pair telephone or
ISDN wire (AWG24 or better) extension up to 1.2km |
Dip Switch: |
|
|
4 position DIP switch |
Performance: |
|
Full VDSL2 bandwidth up to: (Down Stream
/ Up Stream)
- 200m -> 100/55Mbps
- 400m -> 90/40Mbps
- 600m -> 70/10Mbps
- 800m -> 48/8Mbps
- 1000m -> 30/6Mbps |
By ordering from this page you will receive one (single unit) VX-VEB160R2 Ethernet Extender. Please keep in mind that this product is designed to work in pairs.
|
